Anticorrosive Polypropylene Mesh Membrane Tape

Model NO.: T500


Trademark: XUNDA


Origin: Jining City, China




Material: PP


Specification: SGS DVGW EN23068 AWWA C209 C214


HS Code: 39191099


Polypropylene Mesh Membrane Tape (T 500)

IDescription

The T 500 polypropylene mesh menbrane tape is cold applied tape for both metallic pipelines and waterproofing works against outdoor bad weathers .







IIStructures

Backing : PP woven fabric cloth,

Adhesive layer: Butyl rubber Bituminous Compound

III Uses

Waterproofing-

Pipelines protection

-Waterproofing membrane for basements,substructures and flat deck applications. plazas, bridge, vehicular traffic structures, or parking decks overlaid with an asphalt concrete wearing course. -Tough, high performance waterproof membrane for critical substructures and civil engineering works. -Provides a vapor and waterproof membrane to water excluding structures and protects concrete from attack by aggressive ground salts. -Protection for wall ,floor, roof, corner, basement etc. to against from attack by bad weather, rain, acid alkaline salt

_ Weld joints _ Bends _ Fittings _ Bare pipe lengths _ Pipe rehab and repair -Bare pipe length

IV Features

Waterproofing-	Pipes protection
-Cold applied. -High resistance to bad weather environment -Good performance itself to keep dry -Easily application &installation. -Suitable for a wide range of temperatures - Compatible primers -Safe,clean	_ Cold applied _ Excellent self adhesion to pipe _ Flexibility provides extra protection at vulnerable areas _ Excellent conformability and consistent uniform thickness _ Easily applied with no special equipment _ Compatible with common pipe coatings _ Excellent resistance to cathodicdisbonding

V Technical Datas

PHYSICAL PROPERPTIES	UNIT	TEST METHOD	TYPICAL VALUES
Total thickness	mil	ASTM D 1000	40mils	50mils	60mils	65mils
Tensile Strength	lb/in	ASTM D 1000	30(5kg/cm)	35(6.3kg/cm)	39(7kg/cm)	42(7.5kg/cm)
Length			25mtrs	20mtrs	15mtrs	10mtrs
Width			2",4",6",9"
Peel adhesion To primed pipe	oz/in	ASTM D 1000	269(3kg/cm)	296(3.3kg/cm)	314 (3.5kg/cm)	340(3.8kg/cm)
To backing	oz/in	ASTM D 1000	90(1kg/cm)	90(1kg/cm)	117(1.3kg/cm)	135(1.5kg/cm)
Dielectric Strength	KV/mm	ASTM D 1000	42	42.6	43	43.8
Volume Resistivity	ohm·m	ASTM D 257	2.5 X 1012	2.5 X 1012	2.5 X 1012	2.5 X 1012
Water Vapor Transmission Rate	g/ m2 /24h	ASTM E 96	0.06	0.05	0.03	0.02
Water Absorptivity	%	ASTM D 570	0.1	0.1	0.1	0.1
Application Temperature	°F		-31-+160 (-35-+70ºC)
Max service temperature	°F		-40-+176 (-40-+80ºC)

Contact us if you need more details on Anticorrosion Tape. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Polypropylene Tape、Pipe Wrap Tape. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Polypropylene Tape