Model No.: T1100
The T1100 series is Cold applied tape coating system for anti corrosion of field joints,fittings, and specifically pipeing. The adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing.
The Joint wrap tape shall be applied by hand or with a wrapping machine.
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene
Heavy duty adhesive
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Conformable to irregular shapes.
Meets ASTM D 1000 Standard
IV Technical datas:
|Total thickness (mm)||0.64||0.76||1.02||1.27|
|Backing thickness (mm)||0.28||0.30||0.35||0.50|
|Adhesive thickness (mm)||0.36||0.46||0.67||0.77|
|Tensile strength (N/ cm)||≥45||≥60||≥80||≥100|
|Adhesion to Prime Pipe (N/cm)||≥25|
|Dielectric Strength (KV/cm)||≥40||42||42.5||45|
|Volume Resistivity (Ω.m)||≥2.5x1012||≥2.5x1012||≥2.5x1012||≥2.5x1012|
|Water Vapor Transmission Rate (24h)g/||≤0.1||≤0.1||≤0.1||≤0.1|
|Water Absorptivity (%)||≤0.1||≤0.1||≤0.1||≤0.1|
|UV Resistance 600h||≥80 %||≥80 %||≥80 %||≥80 %|
|Application Temperature||-5 to 60 0 C|
|Max Serve Temperature||-40 to 80 ºC|
Contact us if you need more details on Anticorrosion Tape. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Pipe Wrap Tape、Adhesive Tape. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Pipe Wrap Tape
Premium Related Products