Model No.: T2300
Model NO.: T2300
Feature: High Strength, Waterproof
Origin: Jining City, China
Certification: ISO, SGS
Type: Adhesive Tape
Anticorrosive Tape ,T2300 Inner Tape: 0.5mm 0.635mm 0.76mm Thickness
Specification: SGS DVGW EN23068 AWWA C209 C214
HS Code: 39191099
Pipeline wrap Protective Tapes (T 2300)
The T2300 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. The outer-layer tape backing shall be compounded so that it will be resistance to outdoor weathering.
The outer-layer tape shall be applied after the inner-layer tape by hand or with a wrapping machine.
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene
Excellent adhesion to inner-layer tape and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
OUTER WRAP TAPE: XUNDA-T200 Series
|Type||T 250||T 265||T 280|
|Total thickness||0.51 mm||0.65 mm||0.80 mm|
|Film||0.38 mm||0.51 mm||0.63 mm|
|Adhesive||0.13 mm||0.14 mm||0.17 mm|
|Elongation at Break||³ 400%|
|Tensile Strength||45.3 N/cm||50.8 N/cm||60.1 N/cm|
|Yield Strength||35.9 N/cm||43.4 N/cm||45.8 N/cm|
|Dielectric Breakdown||32.9 KV/mm||43.5 KV/mm||45.2 KV/mm|
|Cathodic Disbandment||0.24 in radius 6.4 mm|
|Volume Resistivity||2.5 x 1012 ohm.m|
|Water Vapor Transmission Rate||£ 0.08 gm/M2/24h|
|Water Absorption Rate||< 0.07%|
|Recommended Application Temperature||-50 to +600 C|
|Available Roll Size (width x length)||2" to 9" X 50 to 600 feet|
Contact us if you need more details on Anticorrosion Tape. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Pipe Wrap Tape、Adhesive Tape. If these products fail to match your need, please contact us and we would like to provide relevant information.
Pipeline pump several ways to determine the normal operation: 1, no abnormal noise during operation, run one hour motor is not hot (with experience). 2, look at the import and export pressure pump design point near the head of the operation (with a pressure gauge). 3, measuring motor operating current within the motor rated...
ISW Horizontal Pipeline Centrifugal Pump Structure: 1 Motor: Directly connected with the pump power transmission, the use of brand-name motor. 2 pump shaft: coaxial with the motor, for the motor shaft, to ensure that the concentric shaft, the pump running smoothly. No noise and vibration, using chrome-plated handle,...
I. Maintenance of hot-water pipeline pump 1. Operational maintenance: (1) Imported pipeline must be filled with liquid, forbidding long-term operation of hot-water pipeline pump in cavitation. (2) Regularly check the motor current 値, must not exceed the motor 颔 rated current. (3) After long-running hot-water pipeline pump,...
Pipeline centrifugal pump classification: Pipeline centrifugal pump main products are pipeline centrifugal pump, vertical hot water pump, vertical high temperature centrifugal pump, vertical pipeline pump, vertical stainless steel explosion-proof chemical centrifugal pump. Pipeline centrifugal pump applications: 1. Pipeline...
Product Categories : Anticorrosive Tape
Premium Related Products