Anticorrosion Pipe Wrapping Duct Tape
Basic Info
Model No.: T100
Product Description
Model NO.: T100 Anticorrosion Tape ,T100 Inner Tape: 0.5mm 0.635mm 0.76mm Thickness Specification: SGS DVGW EN23068 AWWA C209 C214 HS Code: 39191099 Material: HDPE Trademark: XUNDA Origin: Jining City, China Polyethylene Anti-corrosion Tapes (T 100)
I Description:
The T100 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.
The inner-layer tape shall be applied after the Primer and before the outer-layer tape by hand or with a wrapping machine
IIStructure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene

III Features
Excellent adhesion to pipe and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
IVTechnical datas:
INNER WRAP TAPE: XUNDA-T 100 Series
Contact us if you need more details on Anticorrosion Tape. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Pipe Wrap Tape、Adhesive Tape. If these products fail to match your need, please contact us and we would like to provide relevant information.
I Description:
The T100 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.
The inner-layer tape shall be applied after the Primer and before the outer-layer tape by hand or with a wrapping machine
IIStructure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene

III Features
Excellent adhesion to pipe and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
IVTechnical datas:
INNER WRAP TAPE: XUNDA-T 100 Series
Type | T-150 | T-165 | T-180 |
Total thickness | 0.51 mm | 0.65 mm | 0.80 mm |
Polyethylene Film | 0.31 mm | 0.34 mm | 0.39 mm |
Synthetic Adhesive | 0.20 mm | 0.31 mm | 0.41 mm |
Elongation at Break | ³ 400% | ||
Tensile Strength | 60 N/cm | 61.2 N/cm | 63 N/cm |
Yield Strength | 35.5 N/cm | 42.3 N/cm | 45.5 N/cm |
Peel Adhesion to Primed Pipe | 21.2 N/cm | 26.5 N/cm | 33.2 N/cm |
Dielectric Strength | 35 KV/mm | 45.8 KV/mm | 48 KV/mm |
Cathodic Disbandment | 0.24 in radius 6.4 mm | ||
Volume Resistivity | 2.5 x 1012 ohm.m | ||
Water Vapor Transmission Rate | £ 0.1gm/M2/24h | ||
Water Absorption Rate | < 0.06% | ||
Recommended Application Temperature | -5 to +60ºC | ||
Max Serve Temperature | -40 to + 80ºC | ||
Color | Black | ||
Available Roll Size (width x length) | 2" to 9" X 50 to800 feet |
Product Categories : Anticorrosion Tape
Email to this supplier
Premium Related Products
Other Products
Hot Products
Kc 97 Mastic Silicone Rubber Insulation Shrink Tube ConnectorHVAC Sector 40mic Aluminum Duct TapeStrong Adhesive Aluminium Duct TapeRefrigerator Aluminum Tape Without LinerHVAC Aluminium Duct Tape with LinerPipeline Anticorrosion Outer Wrap TapePE Pipe Wrap Joint TapesViscoelastic Body Pipe Wrap Adhesive TapeAluminium Pipe Wrap Duct TapeAluminium Foil Waterproof Flashing TapeAnticorrosive Polypropylene Mesh Membrane TapePolyethylene Butyl Anticorrosion 3ply TapeAnticorrosion Pipe Wrap Tape PrimerPolyethylene Anti Corrosion Pipe Wrap TapeAnticorrosive TapeAnticorrosion Pipe Wrapping Duct Tape